From: Rajeev Siddappa (raj_lab@xxxxxxxxx)
Date: Thu Dec 13 2001 - 23:30:46 GMT-3
Hi Rob,
I think u need to us eth command
> bridge 1 bitswap-layer3-addresses
On both R3 and also R8.
Chek it out.
Rajeev.
--- Rob Rummel <Rummel@Hawaii.rr.com> wrote:
> My ASCII diagram got messed up in transit. So here
> is a breakdown of the
> setup.
>
> R1 (10.3.8.1) is connected via fa0/0 to R3 e0
> R3 (10.3.8.3) To0 going thru the 3900 to R8 To0/0
> R8 e0/0 (10.3.8.8) and e1/0 (10.3.8.9)
> Final goal is to ping 10.3.8.8 from R1.
> Cant even get past R3...........
>
>
> -Ethernet (n): something used to catch the
> etherbunny-
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Rob Rummel
> Sent: Wednesday, December 12, 2001 10:18 PM
> To: ccielab@groupstudy.com
> Cc: Wayne Lewis; Frank B
> Subject: Can't get translational bridging to work
> also!!
>
> I followed the previous thread and I cant get
> translation bridging to
> work. I tried all the suggestions in the last thread
> and still no good.
> What am I missing.
> Here is my setup.
>
> R1 fa0/0|-----------|e0 R3 to0 |10.3.8.3/24
> |to0/0 R8
> |--------- e0/0 10.3.8.8/24
> 10.3.8.1/24 |
> |
> |---------- e1/0 11.3.8.8/24
> 11.3.8.1/24 secondary |___cat3900_______|
>
>
> I want to be able to ping R8 Ethernet interfaces
> from R1
> Currently I'm not even able to ping R3's To0
> interface.
> Here are the relevant configs for R1 and R3
>
> R1
>
> interface FastEthernet0/0
> ip address 11.3.8.1 255.255.255.0 secondary
> ip address 10.3.8.1 255.255.255.0
> no ip directed-broadcast
> bridge-group 1 (don't think I need this here)
> !
> !
> bridge 1 protocol ieee (don't think I need this
> here)
> bridge 1 bitswap-layer3-addresses ( I tried this
> command on R3 also)
>
>
> R3
> source-bridge ring-group 300
> source-bridge transparent 300 30 1 1
> !
> !
> interface Ethernet0
> no ip address
> no ip directed-broadcast
> bridge-group 1
> !
> !
> interface TokenRing0
> ip address 10.3.8.3 255.255.255.0
> no ip directed-broadcast
> ring-speed 16
> source-bridge 3 1 300
> (I tried placing bridge-group 1 here)
> !
> bridge 1 protocol ieee
>
>
> -The faulty interface lies between the chair and the
> keyboard-
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:43 GMT-3