From: Rob Rummel (Rummel@xxxxxxxxxxxxx)
Date: Thu Dec 13 2001 - 05:18:10 GMT-3
I followed the previous thread and I cant get translation bridging to
work. I tried all the suggestions in the last thread and still no good.
What am I missing.
Here is my setup.
R1 fa0/0|-----------|e0 R3 to0 |10.3.8.3/24 |to0/0 R8
|--------- e0/0 10.3.8.8/24
10.3.8.1/24 | |
|---------- e1/0 11.3.8.8/24
11.3.8.1/24 secondary |___cat3900_______|
I want to be able to ping R8 Ethernet interfaces from R1
Currently I'm not even able to ping R3's To0 interface.
Here are the relevant configs for R1 and R3
R1
interface FastEthernet0/0
ip address 11.3.8.1 255.255.255.0 secondary
ip address 10.3.8.1 255.255.255.0
no ip directed-broadcast
bridge-group 1 (don't think I need this here)
!
!
bridge 1 protocol ieee (don't think I need this here)
bridge 1 bitswap-layer3-addresses ( I tried this command on R3 also)
R3
source-bridge ring-group 300
source-bridge transparent 300 30 1 1
!
!
interface Ethernet0
no ip address
no ip directed-broadcast
bridge-group 1
!
!
interface TokenRing0
ip address 10.3.8.3 255.255.255.0
no ip directed-broadcast
ring-speed 16
source-bridge 3 1 300
(I tried placing bridge-group 1 here)
!
bridge 1 protocol ieee
-The faulty interface lies between the chair and the keyboard-
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3