From: xander (xander@xxxxxx)
Date: Thu Dec 13 2001 - 05:24:22 GMT-3
Hello David,
Only if you are asked about default queue by your paper.
Wednesday, December 12, 2001, 6:47:07 PM, you wrote:
DV> In bootcamp lab 20, it asks you to do
DV> 50% of DLSW
DV> 25% of IP
DV> 25% of IPX
DV> Most of you would agree that the solution would probably be something like
this
DV> queue-list 1 protocol dlsw 1
DV> queue-list 1 protocol ip 2
DV> queue-list 1 protocol ipx 3
DV> queue-list 1 queue 1 byte-count 2048
DV> queue-list 1 queue 2 byte-count 1024
DV> queue-list 1 queue 3 byte-count 1024
DV> However, if you think about that, where would the rest of the traffic
DV> go? If I have other type of traffic besides dlsw, ip, and ipx, then it
DV> will sit in the queue until my line is free? Hence should I include the
DV> default (see below)? However, if I do that, then I would no long get 50%,
DV> 25%, 25%.
DV> queue-list 1 protocol dlsw 1
DV> queue-list 1 protocol ip 2
DV> queue-list 1 protocol ipx 3
DV> queue-list 1 default 4
DV> queue-list 1 queue 1 byte-count 2048
DV> queue-list 1 queue 2 byte-count 1024
DV> queue-list 1 queue 3 byte-count 1024
DV> queue-list 1 queue 4 byte-count 1024
-- WBW, xander CCNP Voice Access, AP1024-RIPE
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3