From: Richard Gallagher (rgallagh@xxxxxxxxx)
Date: Wed Dec 12 2001 - 13:12:55 GMT-3
David,
"dlsw" keyword is only for FST encapsulation, for TCP you need to specify all
the ports involved.
Rich
CCIE #7211
On Dec 12, 9:38am, David Vu chatted about:
> Subject:Custom queue-list for DLSW
> In bootcamp lab 20, it asks you to do a custom queue with
>
> 50% on DLSW
> 25% on IP
> 25% on IPX
>
> For DLSW, the solution is
> access-list 101 permit tcp any eq 2065 any
> access-list 101 permit tcp any any eq 2065
> access-list 101 permit tcp any any eq 2067
> access-list 101 permit tcp any any eq 1981
> access-list 101 permit tcp any any eq 1982
> access-list 101 permit tcp any any eq 1983
> queue-list 1 protocol ip 1 list 101
>
> Would it be easier to do "queue-list 1 protocol dlsw 1" instead of using an
> access-list?
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3