From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Wed Dec 12 2001 - 13:07:40 GMT-3
the dlsw parameter on the queue-list is for SNA traffic only you have to specif
y all of the dlsw ports to be sure that you are queuing everything properly.
Welcome to the first of many dlsw gotchas.
-----Original Message-----
From: David Vu [mailto:dd_vu@yahoo.com]
Sent: 12 December 2001 15:38
To: ccielab@groupstudy.com
Subject: Custom queue-list for DLSW
In bootcamp lab 20, it asks you to do a custom queue with
50% on DLSW
25% on IP
25% on IPX
For DLSW, the solution is
access-list 101 permit tcp any eq 2065 any
access-list 101 permit tcp any any eq 2065
access-list 101 permit tcp any any eq 2067
access-list 101 permit tcp any any eq 1981
access-list 101 permit tcp any any eq 1982
access-list 101 permit tcp any any eq 1983
queue-list 1 protocol ip 1 list 101
Would it be easier to do "queue-list 1 protocol dlsw 1" instead of using an
access-list?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3