Can't get translational bridging to work!

From: kyle prevey (preveyk@xxxxxxxxxxx)
Date: Tue Dec 11 2001 - 22:58:40 GMT-3

   
In my home lab, I setup R1 as a translational bridge and I put R2 on the
token segment and put R3 on the Ethernet segment but they don't talk. Here
is the config:

R1
source-bridge ring-group 10
source-bridge transparent 10 3 1 1
!
int e0
no ip add
bridge-group 1
!
int to0
no ip add
source-bridge 1 1 10
ring 16
!
end

R2

int to0
ip add 10.1.1.1 255.255.255.0
ring 16
!
end

R3
int e0
ip add 10.1.1.2 255.255.255.0
!
end

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3