From: Rajeev Siddappa (raj_lab@xxxxxxxxx)
Date: Tue Dec 11 2001 - 21:28:04 GMT-3
You need to add one more command
bridge bridge-group bitswap-layer3-addresses
Rajeev.
--- kyle prevey <preveyk@hotmail.com> wrote:
> In my home lab, I setup R1 as a translational bridge
> and I put R2 on the
> token segment and put R3 on the Ethernet segment but
> they don't talk. Here
> is the config:
>
> R1
> source-bridge ring-group 10
> source-bridge transparent 10 3 1 1
> !
> int e0
> no ip add
> bridge-group 1
> !
> int to0
> no ip add
> source-bridge 1 1 10
> ring 16
> !
> end
>
> R2
>
> int to0
> ip add 10.1.1.1 255.255.255.0
> ring 16
> !
> end
>
> R3
> int e0
> ip add 10.1.1.2 255.255.255.0
> !
> end
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3