From: Chris Larson (clarson52@xxxxxxxx)
Date: Fri Dec 07 2001 - 19:33:39 GMT-3
O.K. Same configs, ethernet subnets are both /22 and my NLSP still does not
work. Any help/suggestions??
> >R5
> >
> >multilink virtual-template 1
> >ipx routing 0005.0005.0005
> >ipx internal-network 5
> >!
> >interface Loopback22
> >no ip address
> >no ip directed-broadcast
> >ipx network 55
> >!
> >interface Tunnel3
> >no ip address
> >no ip directed-broadcast
> >ipx ipxwan 0 unnumbered R5
> >ipx nlsp enable
> >tunnel source 172.16.9.5
> >tunnel destination 172.16.9.3
> >!
> >interface Ethernet0
> >ip address 172.16.9.5 255.255.252.0
> >no ip directed-broadcast
> >!
> >ipx router eigrp 1
> >redistribute nlsp
> >network 55
> >!
> >!
> >ipx router nlsp
> >area-address 0 0
> >redistribute eigrp 1
> >!
> >
> >
> >R3
> >
> >ipx routing 0003.0003.0003
> >ipx internal-network 3
> >!
> >interface Loopback0
> >ip address 172.16.144.1 255.255.255.0
> >no ip directed-broadcast
> >ipx network 30
> >!
> >interface Loopback1
> >ip address 172.16.145.1 255.255.255.0
> >no ip directed-broadcast
> >ipx network 31
> >!
> >interface Loopback2
> >ip address 172.16.146.1 255.255.255.0
> >no ip directed-broadcast
> >ipx network 32
> >!
> >interface Tunnel0
> >no ip address
> >no ip directed-broadcast
> >ipx network 13
> >tunnel source 172.16.1.3
> >tunnel destination 172.16.1.1
> >!
> >interface Tunnel3
> >no ip address
> >no ip directed-broadcast
> >ipx ipxwan 0 unnumbered R3
> >ipx nlsp enable
> >tunnel source 172.16.9.3
> >tunnel destination 172.16.9.5
> >!
> >interface FastEthernet0/0
> >ip address 172.16.9.3 255.255.252.0
> >no ip directed-broadcast
> >ip summary-address eigrp 1 172.16.50.0 255.255.255.192 5
> >speed 100
> >!
> >ipx router eigrp 1
> >redistribute nlsp
> >network all
> >!
> >!
> >ipx router nlsp
> >area-address 0 0
> >redistribute eigrp 1
> >!
----- Original Message -----
From: "Stephen Oliver" <stevie_oliver@hotmail.com>
To: <clarson52@home.com>; <ccielab@groupstudy.com>
Sent: Friday, December 07, 2001 4:31 AM
Subject: Re: IPX NLSP
> Your ethernet masks are different.
>
> One ethernet interface is on the 172.16.9.0 network and one is on the
> 172.16.8.0 network.
>
> Stevie.
>
>
> >From: "Chris Larson" <clarson52@home.com>
> >Reply-To: "Chris Larson" <clarson52@home.com>
> >To: <ccielab@groupstudy.com>
> >Subject: IPX NLSP
> >Date: Thu, 6 Dec 2001 21:44:36 -0500
> >
> >I am trying to run NLSP between R3 and R5 and I cannot get it work. They
> >are
> >Ethernet interfaces but I have set NLSP and IPXWAN up over tunnel
> >interfaces.
> >It is Tunnel 3 on both routers. They can ping each other via IP.
> >They both have ipx routing enabled and an internal network. What am I
> >missing
> >, it is driving me nuts.
> >
> >I have edited both configs down to the pertinent parts. If you need the
> >whole
> >thing lemme know. Your help would be appraciated.
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:40 GMT-3