From: Chris Larson (clarson52@xxxxxxxx)
Date: Thu Dec 06 2001 - 23:44:36 GMT-3
I am trying to run NLSP between R3 and R5 and I cannot get it work. They are
Ethernet interfaces but I have set NLSP and IPXWAN up over tunnel interfaces.
It is Tunnel 3 on both routers. They can ping each other via IP.
They both have ipx routing enabled and an internal network. What am I missing
, it is driving me nuts.
I have edited both configs down to the pertinent parts. If you need the whole
thing lemme know. Your help would be appraciated.
R5
multilink virtual-template 1
ipx routing 0005.0005.0005
ipx internal-network 5
!
interface Loopback22
no ip address
no ip directed-broadcast
ipx network 55
!
interface Tunnel3
no ip address
no ip directed-broadcast
ipx ipxwan 0 unnumbered R5
ipx nlsp enable
tunnel source 172.16.9.5
tunnel destination 172.16.9.3
!
interface Ethernet0
ip address 172.16.9.5 255.255.255.0
no ip directed-broadcast
!
ipx router eigrp 1
redistribute nlsp
network 55
!
!
ipx router nlsp
area-address 0 0
redistribute eigrp 1
!
R3
ipx routing 0003.0003.0003
ipx internal-network 3
!
interface Loopback0
ip address 172.16.144.1 255.255.255.0
no ip directed-broadcast
ipx network 30
!
interface Loopback1
ip address 172.16.145.1 255.255.255.0
no ip directed-broadcast
ipx network 31
!
interface Loopback2
ip address 172.16.146.1 255.255.255.0
no ip directed-broadcast
ipx network 32
!
interface Tunnel0
no ip address
no ip directed-broadcast
ipx network 13
tunnel source 172.16.1.3
tunnel destination 172.16.1.1
!
interface Tunnel3
no ip address
no ip directed-broadcast
ipx ipxwan 0 unnumbered R3
ipx nlsp enable
tunnel source 172.16.9.3
tunnel destination 172.16.9.5
!
interface FastEthernet0/0
ip address 172.16.9.3 255.255.252.0
no ip directed-broadcast
ip summary-address eigrp 1 172.16.50.0 255.255.255.192 5
speed 100
!
ipx router eigrp 1
redistribute nlsp
network all
!
!
ipx router nlsp
area-address 0 0
redistribute eigrp 1
!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:39 GMT-3