From: Rthugo1@xxxxxxx
Date: Wed Dec 05 2001 - 01:43:00 GMT-3
In a message dated 12/4/2001 9:45:50 PM Central Standard Time,
jasbhati@cisco.com writes:
> Subj:Read -only flash on 2500 routers
> Date:12/4/2001 9:45:50 PM Central Standard Time
> From: jasbhati@cisco.com (Jaspreet Bhatia)
> Sender: nobody@groupstudy.com
> Reply-to: <A HREF="mailto:jasbhati@cisco.com">jasbhati@cisco.com</A> (Jaspree
t Bhatia)
> To: ccielab@groupstudy.com
>
> Jaspreet,
Try this:
Conf t
config-reg 0x02101
reboot
*This will put you in router(boot) mode and allow read/write of your flash.
HTH,
Rob H. NP, DP, blah,blah,blah.................
>
> Folks,
> I have about 5 2511 routers taht I am trying to upgrade
> to 12.1 .The problem is that the flash is read-only so will not allow me to
> do anything on the flash .Is there a way to convert that flash into a R/W
> flash ?
>
> Thanks for your help
>
> Jaspreet
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:38 GMT-3