From: fathallah said (sfathallah@xxxxxxxxxxxxxxx)
Date: Sat Dec 01 2001 - 13:36:19 GMT-3
Hello Group,
I have this config :
Loopback0----R1<----------->R2<---------------->R3
The 3 router are running OSPF area 0 . I have defined the loopback0 with :
128.103.88.129 / 28.
but in the R3 routing table the ospf give network 128.103.88.129 / 32.
it is normal that ospf advertise always the loopback with 32 mask bit ?.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:35 GMT-3