From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Fri Nov 30 2001 - 10:17:05 GMT-3
Thanks for that very insightful answer.
GW
-----Original Message-----
From: fwells12 [mailto:fwells12@hotmail.com]
Sent: Thursday, November 29, 2001 9:49 PM
To: Williams, Glenn
Subject: Re: Lab 4 vlinks
Go read up on virtual links...
----- Original Message -----
From: "Williams, Glenn" <WILLIAMSG@PANASONIC.COM>
To: <ccielab@groupstudy.com>
Sent: Thursday, November 29, 2001 7:00 PM
Subject: Lab 4 vlinks
> Hi,
>
> Has anyone had the problem where this message is received on lab 4, R2
>
> 00:22:07: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
> backbone area must be virtual-link but not found from 10.10.1.5, Serial0
>
> 00:22:16: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
> backbone area must be virtual-link but not found from 10.10.1.3, Serial0
>
> Area 5 is configured as a v link between R1 and R2 to the OSPF router ids.
> I have done v links successfully in the past.
>
> The problem goes away when I issue this command on R2 only:
>
> R2(config-router)#area 5 virtual-link 11.1.1.5
>
> R2(config-router)#area 5 virtual-link 10.33.1.65
>
> Did I miss something big on v-links?
>
> I looked at ccbootcamp answers and could not see any difference in my
> configs on ospf or serial lines.
>
> Reboot or clear ip ospf proc does not work either.
>
>
> GW
>
> MCSE (worthless) CCNP - the paper is nice I guess
> I have nothing cute to say.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:27 GMT-3