From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Fri Nov 30 2001 - 00:00:23 GMT-3
Hi,
Has anyone had the problem where this message is received on lab 4, R2
00:22:07: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
backbone area must be virtual-link but not found from 10.10.1.5, Serial0
00:22:16: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
backbone area must be virtual-link but not found from 10.10.1.3, Serial0
Area 5 is configured as a v link between R1 and R2 to the OSPF router ids.
I have done v links successfully in the past.
The problem goes away when I issue this command on R2 only:
R2(config-router)#area 5 virtual-link 11.1.1.5
R2(config-router)#area 5 virtual-link 10.33.1.65
Did I miss something big on v-links?
I looked at ccbootcamp answers and could not see any difference in my
configs on ospf or serial lines.
Reboot or clear ip ospf proc does not work either.
GW
MCSE (worthless) CCNP - the paper is nice I guess
I have nothing cute to say.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:27 GMT-3