RE: CCBOOTCAMP LAB 20

From: Bill Carter (bcarter@xxxxxxxxxxxxxx)
Date: Wed Nov 28 2001 - 19:20:27 GMT-3

• Next message: Charles Huang: "Re: Source Route Bridging"
• Previous message: Jason Gardiner: "LAB Attempt - Probably Failed - Long Winded"
• Maybe in reply to: Dane Clemons: "CCBOOTCAMP LAB 20"
• Next in thread: fwells12: "Re: CCBOOTCAMP LAB 20"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
What does ip ospf point-to-point and ip ospf point-to-multipoint do???????

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Dane Clemons
Sent: Wednesday, November 28, 2001 2:59 PM
To: ccielab@groupstudy.com
Subject: CCBOOTCAMP LAB 20

Requirement of the lab states to change the hello interval on a OSPF
interface
without using the IP OSPF hello interval command. The IP OSPF dead
interval
command is used, will this command change the hello interval. I have tried
this
command and it does not work. Maybe a code issue? Any advice would be
appreciated.

Thanks

• Next message: Charles Huang: "Re: Source Route Bridging"
• Previous message: Jason Gardiner: "LAB Attempt - Probably Failed - Long Winded"
• Maybe in reply to: Dane Clemons: "CCBOOTCAMP LAB 20"
• Next in thread: fwells12: "Re: CCBOOTCAMP LAB 20"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:24 GMT-3