From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Sat Nov 24 2001 - 03:07:56 GMT-3
Show us your configs...
----- Original Message -----
From: "John Neiberger" <neiby@excite.com>
To: <ccielab@groupstudy.com>
Cc: <elouie@yahoo.com>
Sent: Friday, November 23, 2001 9:43 PM
Subject: Transparent Bridging IP from TR to ETH over Serial
> I'm having trouble configuring this and it seem that there ought to be a
way
> to do this. Here is the scenario:
>
> R1----(t/r)-----R2---(serial)---R3 ----(eth)---- R4
>
> IP routing is turned off on R2 and R3. I'm attempting to transparently
> bridge IP from the t/r segment to the ethernet segment and I'm failing
> miserably.
>
> I've tried a few different things with no success. At the moment I'm
> playing with SR/TLB on R2, but usually that involves T/R to Eth conversion
> on the same router, right? In this case it's T/R to serial and this isn't
> working so far.
>
> If I wasn't trying to bridge IP I could use DLSw, but I don't see how I
> could use that here.
>
> I should mention that this isn't part of a lab scenario, I just wanted to
> see if I could do it.
>
> Any thoughts? I think I'm going to give up for the evening and try again
> tomorrow when I can actually think clearly. <g>
>
> Thanks,
> John
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:22 GMT-3