From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Tue Nov 20 2001 - 16:08:02 GMT-3
I am reading Integrating Voice and Data Networks by Keagy. It is very good.
----- Original Message -----
From: "Jason Graun" <jgraun@theocc.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, November 20, 2001 11:00 AM
Subject: RE: Can someone verify this voice config please.
> Do You have any documentation on that feature of voice?
>
> Thanks
>
> Jason
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Andy Cuberly
> Sent: Tuesday, November 20, 2001 8:00 AM
> To: 'fwells12'; ccielab@groupstudy.com
> Subject: RE: Can someone verify this voice config please.
>
> Almost there - You need to insert a single "." before the capital "T" in
> the
> destination pattern in the VOIP dial peer.
>
> Looks like this:
>
> destination-pattern .T
>
> Also - You need to add a valid extension number in the Pots dial peer on
> the
> destination pattern line.
>
> example:
>
> R1
> dial-peer voice 1 pots
> destination-pattern 111
> port 1/0/0
>
> dial-peer voice 2 voip
> destination-pattern .T
> session target ipv4:x.x.x.x (IP address of R2)
>
>
> The rest looks good.
>
> Andy Cuberly
> CCIE #8386
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> fwells12
> Sent: Tuesday, November 20, 2001 12:50 AM
> To: ccielab@groupstudy.com
> Subject: Can someone verify this voice config please.
>
>
> I don't have voice access to try this. The object of the excersize is
> to be
> able to use any number to dial over frame-relay to another phone and
> have
> that
> phone be able to dial back using any number too.
>
>
> R1-----------frame-relay ------------R2
>
> R1
> dial-peer voice 1 pots
> destination-pattern T
> port 1/0/0
>
> dial-peer voice 2 voip
> destination-pattern T
> session target ipv4:x.x.x.x
>
> R2
> dial-peer voice 1 pots
> destination-pattern T
> port 1/0/0
>
> dial-peer voice 2 voip
> destination-pattern T
> session target ipv4:x.x.x.x
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:19 GMT-3