From: Khalid Nafie (knafie@xxxxxxxxxx)
Date: Tue Nov 13 2001 - 14:38:09 GMT-3
Portlist work on token ring and serial only, not ehternet
-----Original Message-----
From: Vincent Zhang [mailto:vincentzhang@yahoo.com]
Sent: Tuesday, November 13, 2001 3:00 AM
To: Daniel Hong; 'fwells12'; Charles Huang; ccielab@groupstudy.com
Subject: Re: dlsw port-list and ring-list
Checked it back, Yes, port-list doesnot work on etherent port now, use
bridge group.
----- Original Message -----
From: "Daniel Hong" <Daniel.Hong@nec.com.au>
To: "'fwells12'" <fwells12@hotmail.com>; "Charles Huang"
<CharlesNY2000@yahoo.com>; <ccielab@groupstudy.com>
Sent: Tuesday, November 13, 2001 5:46 PM
Subject: RE: dlsw port-list and ring-list
> I don't think port-list will work on ethernet port, but it will work on
bridge group interface. Can someone correct it if I'm wrong.
>
> Daniel
>
> -----Original Message-----
> From: fwells12 [mailto:fwells12@hotmail.com]
> Sent: 13/11/2001 8:19
> To: Charles Huang; ccielab@groupstudy.com
> Subject: Re: dlsw port-list and ring-list
>
>
> Ring lists can only allow traffic to Token-Ring interfaces. Port lists
can
> do both ethernet and T.R.
>
> ----- Original Message -----
> From: "Charles Huang" <CharlesNY2000@Yahoo.Com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, November 12, 2001 9:42 PM
> Subject: dlsw port-list and ring-list
>
>
> > can anyone tell me the difference between the two ?
> > Doc CD gave the same definition.
> > are they suppose to be the same ?
> >
> > Thanks
> > Charles
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:14 GMT-3