RE: basic 2600

From: Jeff Kesemeyer (jkesemey@xxxxxxxxxxxxx)
Date: Tue Nov 13 2001 - 14:27:33 GMT-3

• Next message: Khalid Nafie: "RE: dlsw port-list and ring-list"
• Previous message: Khalid Nafie: "RE: dialer profile problem"
• Maybe in reply to: stephen.paynter@xxxxxx: "RE: basic 2600"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Run confreg and modify the boot parameters. If you need to load an IOS
into flash use tftpdnld.

                Jeff Kesemeyer
                CCNP, CCDP, MCSE, CNE
                www.bradshawlabs.com
                "Your CCIE Rack Rental Source"

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Don Dettmore
Sent: Tuesday, November 13, 2001 12:54 PM
To: CCIE Lab List
Subject: OT: basic 2600

Basic question here (I'm kinda embarassed to ask it - must be Tuesday
mental
block)

I have a new 2600 with empty flash. I boot to Rom Monitor and change my
config register to boot from ROM (0x2101). But I still get the
following:

device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"

Why is it still trying to boot from flash?

TIA

Don Dettmore
"This email does not necessarily reflect just how right I always am."

• Next message: Khalid Nafie: "RE: dlsw port-list and ring-list"
• Previous message: Khalid Nafie: "RE: dialer profile problem"
• Maybe in reply to: stephen.paynter@xxxxxx: "RE: basic 2600"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:14 GMT-3