From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Sun Nov 11 2001 - 14:36:15 GMT-3
I searched the archive but didn't see this discussed:
Question 8 on Fatkid's advanced dlsw lab:
8. Configure prioritization between routers R5 and R1 such that SNA
traffic gets at least 50 percent of the available bandwidth sampled
every 0.125 seconds
Solution given on the lab:
queue-list 2 protocol ip 1 tcp 2065
queue-list 2 default 10
queue-list 2 queue 1 byte-count 500
queue-list 2 queue 10 byte-count 500
Netbios would also be under port 2065 and would be included in queue 1,
not queue 10. So SNA would actually get less than 50% of available
bandwidth. An error in the solution or was he assuming there wouldn't
be any netbios traffic?
Brian
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:12 GMT-3