RE: question about fatkid Advanced DLSW lab

From: Albert Lu (albert_ccie@xxxxxxxxx)
Date: Tue Nov 20 2001 - 03:56:47 GMT-3


   
Brian,

Good point. Is it assumed that there will not be any netbios traffic going
over it? I've just done this lab a few days ago.

Albert

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brian Hescock
Sent: Monday, November 12, 2001 4:36 AM
To: ccielab@groupstudy.com
Subject: question about fatkid Advanced DLSW lab

I searched the archive but didn't see this discussed:

Question 8 on Fatkid's advanced dlsw lab:

8. Configure prioritization between routers R5 and R1 such that SNA
traffic gets at least 50 percent of the available bandwidth sampled
every 0.125 seconds

Solution given on the lab:

queue-list 2 protocol ip 1 tcp 2065
queue-list 2 default 10
queue-list 2 queue 1 byte-count 500
queue-list 2 queue 10 byte-count 500

Netbios would also be under port 2065 and would be included in queue 1,
not queue 10. So SNA would actually get less than 50% of available
bandwidth. An error in the solution or was he assuming there wouldn't
be any netbios traffic?

Brian



This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:18 GMT-3