From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Sun Nov 11 2001 - 14:24:53 GMT-3
I have no problem with mine:
ip multicast-routing
ip dvmrp route-limit 20000
!
!
interface TokenRing0
ip address 130.1.80.1 255.255.255.0
ip pim sparse-dense-mode
ip igrm join 224.1.1.1
ring-speed 16
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 224.0.1.40), 00:02:54/00:00:00, RP 0.0.0.0, flags: DJCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
TokenRing0, Forward/Sparse-Dense, 00:02:54/00:00:00
(*, 224.1.1.1), 00:00:06/00:00:00, RP 0.0.0.0, flags: DJCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
TokenRing0, Forward/Sparse-Dense, 00:00:07/00:00:00
>From: Kevin\(>gC6?u\) <y1700@chollian.net>
>Reply-To: Kevin\(>gC6?u\) <y1700@chollian.net>
>To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
>Subject: multicasting on token ring interface
>Date: Mon, 12 Nov 2001 01:15:15 +0900
>
>Please tell me how can make the token ring interface to enable ip
>multicasting.
>
>If sparse-dense-mode on ethernet, just 'ip pim sparse-dense-mode'.
>But I don't know and can't find the way or web site to make tokenring
>enabled with multicast.
>
>please...
>
>thanks.
>
>
>
>===========================================================
>Kevin, Cheol Ung Yang
>
>Cisco Certified Network Professional
>Cisco Certified Design Professional
>Cisco Certified IP Telephony Specialist
>
>Customer Support Team/NI Tech Center/
>Dacom IN
>
>Tel.0505-880-4733
>===========================================================
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:12 GMT-3