From: Park, Peter (peter.park@xxxxxxxxx)
Date: Tue Nov 06 2001 - 16:21:22 GMT-3
show run will display only the configs for which you have right to
configure.
-----Original Message-----
From: R. Benjamin Kessler
To: McCallum, Robert; 'Spoerr, Mathias'; ccielab@groupstudy.com
Sent: 11/6/01 12:51 PM
Subject: RE: Privileged exec level
This is true, however if I have the following command in the
configuration:
privilege exec level 1 show running-config
When I try to use it with level 1 privs. I get the following:
router>sh running-config
Building configuration...
Current configuration : 134 bytes
!
! Last configuration change at 11:48:59 CST Tue Nov 6 2001
! NVRAM config last updated at 18:25:23 CDT Mon Oct 22 2001
!
!
!
!
end
I think you need to have "config" rights to the box in order to see a
meaningful "running config."
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
McCallum, Robert
Sent: Tuesday, November 06, 2001 11:21 AM
To: 'Spoerr, Mathias'; ccielab@groupstudy.com
Subject: RE: Privileged exec level
you can do whatever you want to do regarding priv levels.
sample
username me privilege level 3
privilege exec level 3 configure terminal
and hey presto!
-----Original Message-----
From: Spoerr, Mathias [mailto:Mathias.Spoerr@getronics.com]
Sent: 06 November 2001 16:12
To: ccielab@groupstudy.com
Subject: Privileged exec level
Hello!
Is it possible to configure a privileged exec level 10 to view the
running-config, or is it only possible with privileged exec level 15?
Thank's
Mathias
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:05 GMT-3