From: kenairs (kenairs@xxxxxxxxxxx)
Date: Tue Oct 02 2001 - 12:21:49 GMT-3
You are right . Loopback addess need not to be in the ospf process in order
to be the router-id.
----- Original Message -----
From: Peter Van Oene <pvo@usermail.com>
To: Yorgos Katsikogiannis <gkats@algosystems.gr>; <ccielab@groupstudy.com>
Sent: Tuesday, October 02, 2001 10:37 PM
Subject: Re: 2 OSPF process running simultaneously on the backbone router
> OSPF just choses the highest ip address configured on any loopback. I
don't think it cares whether the loopback is in the ospf process or not.
Hence, both processes will always chose the same one unless you hard code
them otherwise.
>
> Pete
>
>
> *********** REPLY SEPARATOR ***********
>
> On 10/2/2001 at 4:44 PM Yorgos Katsikogiannis wrote:
>
> >Hi all,
> >
> >I face a very strange condition and I would like to share it with you.
> >
> >I have been trying to setup two different OSPF proccesses on a router.
> >This router has two backbone areas and two virtual-links one for the
first
> >OSPF process and the other one for the second OSPF process.
> >
> >When I setup different RIDs on the backbone router (that holds both OSPF
> >processes) under each OSPF process (using the command "router-id") and
> >perform a reload it keeps the correct RIDs.
> >
> >If I setup the RID using a loopback interface for each process
(advertising
> >the loopback networks under each proccess) and perform a reload on the
> >backbone router it mixes the RIDs and I lose the virtual-links. The
version
> >that I am using is 12.1.10
> >
> >I have spent all day going through the archives and any known bugs on the
> >CCO but it keeps failing my notice.
> >The only interesting thing that I have found is CSCdr79314. If sb has
faced
> >this before, please let me know. I don't think that this is a normal
> >condition but ....
> >
> >Thank you in advace.
> >
> >Yorgos
> >**Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:11 GMT-3