From: Daniel Prinsloo (daniel@xxxxxxxxxxxxxx)
Date: Tue Oct 02 2001 - 05:34:03 GMT-3
Tim,
It may also be related to not having CHAP on both the dialer interface
and the interface.
Please let me know if it makes any change.
Tim Fletcher wrote:
> Hi all,
>
> I can't get OSPF demand-circuit to work right with dialer profiles. With a le
gacy DDR config it works fine. When I try to change it to dialer profiles, the
link keeps coming back up immediately after it goes down.
>
> Any ideas what I'm doing wrong? Configs are below.
>
> -Tim
>
> Legacy DDR config (works):
>
> interface Serial0/1:23
> ip address 192.168.0.1 255.255.255.0
> encapsulation ppp
> ip ospf demand-circuit
> dialer map ip 192.168.0.2 name R8 broadcast 5512101
> dialer-group 1
> isdn switch-type primary-ni
> ppp authentication chap
> ppp multilink
> !
> router ospf 1
> log-adjacency-changes
> network 192.168.0.0 0.0.0.255 area 0
> !
> dialer-list 1 protocol ip permit
>
>
> Dialer profiles config (keeps circuit up):
>
> interface Serial0/1:23
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type primary-ni
> ppp authentication chap
> ppp multilink
> !
> interface Dialer1
> ip address 192.168.0.1 255.255.255.0
> encapsulation ppp
> ip ospf demand-circuit
> dialer pool 1
> dialer remote-name R8
> dialer string 5512101
> dialer-group 1
> no peer neighbor-route
> ppp multilink
> !
> router ospf 1
> log-adjacency-changes
> network 192.168.0.0 0.0.0.255 area 0
> !
> dialer-list 1 protocol ip permit
> **Please read:http://www.groupstudy.com/list/posting.html
-- Daniel Prinsloo Prove IT daniel@prove-it.co.uk www.prove-it.co.uk ICQ 42743324 Fax 0870 135 7712 **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:11 GMT-3