From: Rick Burts (burts@xxxxxxxxxxxxxx)
Date: Tue Oct 02 2001 - 19:29:21 GMT-3
Tim
I have seen symptoms somewhat like you describe when there was a
problem with authentication with dialer profiles. I would suggest
a debug ppp authentication on both routers and make sure that the
call is bound to the correct profile on both ends.
Rick
Rick Burts, CCSI CCIE 4615 burts@mentortech.com
Mentor Technologies 240-568-6500 ext 6652
133 National Business Parkway 240-568-6515 fax
Annapolis Junction, Md 20701
Chesapeake Network Solutions has now become Mentor Technologies.
Mentor Technologies is a certified Cisco Training Partner and also
a Cisco Professional Services partner.
We offer most of the Cisco training courses.
We also offer training in Checkpoint Firewall software and
Fore Systems (now Marconi) and MicroMuse.
We also provide network consulting services including
design, management, and problem solving.
We have 21 CCIEs on our staff.
We offer the breakthrough VLAB remote access technology for
access to practice configuration on real equipment.
On Mon, 1 Oct 2001, Tim Fletcher wrote:
> Hi all,
>
> I can't get OSPF demand-circuit to work right with dialer profiles. With a le
gacy DDR config it works fine. When I try to change it to dialer profiles, the
link keeps coming back up immediately after it goes down.
>
> Any ideas what I'm doing wrong? Configs are below.
>
> -Tim
>
> Legacy DDR config (works):
>
> interface Serial0/1:23
> ip address 192.168.0.1 255.255.255.0
> encapsulation ppp
> ip ospf demand-circuit
> dialer map ip 192.168.0.2 name R8 broadcast 5512101
> dialer-group 1
> isdn switch-type primary-ni
> ppp authentication chap
> ppp multilink
> !
> router ospf 1
> log-adjacency-changes
> network 192.168.0.0 0.0.0.255 area 0
> !
> dialer-list 1 protocol ip permit
>
>
> Dialer profiles config (keeps circuit up):
>
> interface Serial0/1:23
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type primary-ni
> ppp authentication chap
> ppp multilink
> !
> interface Dialer1
> ip address 192.168.0.1 255.255.255.0
> encapsulation ppp
> ip ospf demand-circuit
> dialer pool 1
> dialer remote-name R8
> dialer string 5512101
> dialer-group 1
> no peer neighbor-route
> ppp multilink
> !
> router ospf 1
> log-adjacency-changes
> network 192.168.0.0 0.0.0.255 area 0
> !
> dialer-list 1 protocol ip permit
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:12 GMT-3