From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Mon Sep 17 2001 - 15:58:26 GMT-3
Use of the "load" K value isn't recommended, it can lead to unexpected
behavior. Also it doesn't work as most people expect, "load" only comes
into play if you tell eigrp to use it AND only when the route is *first*
put into the routing table. The route will *not* be changed as a result
of the load, you would have to clear the route first and then it would
make path selection using load at that time when it agains put a route
back into the routing table.
Brian
Church, Chuck wrote:
>Both IGRP and EIGRP can base a metric on load. Combining that with a
>variance command might work.
>
>Chuck
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Philippon
>Sent: Monday, September 17, 2001 12:24 PM
>To: ccielab@groupstudy.com
>Subject: Frame-Relay Threshold
>
>
>I am trying to activate an ISDN BRI line when my
>Frame-Relay Line reaches a 50% threshold. Here is the
>catch. I DO NOT want to use the "backup interface"
>and "backup load" command. Any ideas? Thanks.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:19 GMT-3