From: Omar (omar_ccie@xxxxxxxxx)
Date: Sat Sep 15 2001 - 18:37:19 GMT-3
Folks,
I have a 4 router pod and have ospf up and running.
None of the loopback interfaces have OSPF running on it.
I decided to redistribute the loopback interface of one the backbone routers
(Router 1) into the ospf network and used the following command....
redistribute connected metric 100 subnet
....on the surface everything seemed fine. The loopback was advertized an EX
2.
However, when I examined the LS database, I notice that all the connected
links of (Router 1), which already had OSPF running on them, were also being
advertized by type 5 LSAs.
The remaining routers, perfering the internal routes over external, show the
(Router 1) connected links as internal but they do have type 5 LSAs in their
LS database!!!!
It there any way to prevent other connected links being advertized by type 5
LSAs?
I tried route maps but it did not help.
Any suggestions?
Omar.
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:18 GMT-3