From: Len Tucker (tuckerfamily2@xxxxxxxxx)
Date: Sat Sep 15 2001 - 19:04:23 GMT-3
You could selectively redistribute by using a route map so that doesn't
happen.
redistribute connected route-map only-loops metric 100 subnets
route-map only-loops permit
match int loop 0
etc
----- Original Message -----
From: "Omar" <omar_ccie@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, September 15, 2001 5:37 PM
Subject: OSPF Type 5 lsa question
> Folks,
> I have a 4 router pod and have ospf up and running.
> None of the loopback interfaces have OSPF running on it.
> I decided to redistribute the loopback interface of one the backbone
routers
> (Router 1) into the ospf network and used the following command....
>
> redistribute connected metric 100 subnet
>
> ....on the surface everything seemed fine. The loopback was advertized an
EX
> 2.
> However, when I examined the LS database, I notice that all the connected
> links of (Router 1), which already had OSPF running on them, were also
being
> advertized by type 5 LSAs.
> The remaining routers, perfering the internal routes over external, show
the
> (Router 1) connected links as internal but they do have type 5 LSAs in
their
> LS database!!!!
>
> It there any way to prevent other connected links being advertized by type
5
> LSAs?
> I tried route maps but it did not help.
> Any suggestions?
>
> Omar.
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:18 GMT-3