From: Joseph R. Castro (josephrcastro@xxxxxxxx)
Date: Fri Sep 14 2001 - 22:22:57 GMT-3
Thanks all, I am unsure why the IOS became corrupt but after changing the
config-register to 0x42, clearing the config and changing the
config-register back to 0x2102. Thanks all.....
JC
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jerry Toomey
Sent: Thursday, September 13, 2001 11:15 PM
To: Joseph R. Castro; Groupstudy (E-mail)
Subject: Re: 2522 will not boot
This looks like a corrupt IOS. If you have another 2500 router lying
around, you can boot to rommon and load a TFTP image from another router
(must be less than 8mb because it has to copy to RAM and run from RAM.)
If that fixes it, just reboot into rommon and download a new IOS to fix.
If that doesn't fix it, then try clearing the config--boot to rommon, do
an "o/r 0x42" and reboot with no configuration to see if it comes up.
Jerry
--- "Joseph R. Castro" <josephrcastro@home.com> wrote:
> Help,
>
> I just got a Cisco 2522 and it will not boot. I captured the boot
> sequence,
> can anyone help me to figure out what this means/ Thanks....
>
> 00:00:07: %LINK-3-UPDOWN: Interface BRI0, changed state to up
> 00:00:08: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
> 00:00:08: %LINK-3-UPDOWN: Interface Serial0, changed state to down
> 00:00:08: %LINK-3-UPDOWN: Interface Serial1, changed state to downLocal
> Timeout
> (control reg=0x118) Error, address: 0x2134004 at 0x30BE974 (PC)
>
> System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> Copyright (c) 1986-1995 by cisco Systems
> 2500 processor with 14336 Kbytes of main memory
>
> F3: 15190636+262200+1062240 at 0x3000060
>
> Regards,
> Joe
> **Please read:http://www.groupstudy.com/list/posting.html
=====
Jerry Toomey of http://www.wansend.com can be reached at 877-690-2578
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:18 GMT-3