From: John Kim (albugkim@xxxxxxxxxxx)
Date: Fri Sep 14 2001 - 10:05:49 GMT-3
I had almost the same problem. Check Flash memories or replace them.
John Kim
>From: "routerjocky" <elouie@yahoo.com>
>Reply-To: "routerjocky" <elouie@yahoo.com>
>To: "Joseph R. Castro" <josephrcastro@home.com>, "Groupstudy
>\(E-mail\)" <ccielab@groupstudy.com>
>Subject: Re: 2522 will not boot
>Date: Thu, 13 Sep 2001 22:43:45 -0700
>
>I just had a 2523 that did the same thing. I ended up buying a SmartNet
>contract and opening a TAC case. Cisco ended up just replacing the router,
>saying that I had a ROMMON problem.
>
>----- Original Message -----
>From: "Joseph R. Castro" <josephrcastro@home.com>
>To: "Groupstudy (E-mail)" <ccielab@groupstudy.com>
>Sent: Thursday, September 13, 2001 9:54 PM
>Subject: 2522 will not boot
>
>
> > Help,
> >
> > I just got a Cisco 2522 and it will not boot. I captured the boot
>sequence,
> > can anyone help me to figure out what this means/ Thanks....
> >
> > 00:00:07: %LINK-3-UPDOWN: Interface BRI0, changed state to up
> > 00:00:08: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
> > 00:00:08: %LINK-3-UPDOWN: Interface Serial0, changed state to down
> > 00:00:08: %LINK-3-UPDOWN: Interface Serial1, changed state to downLocal
> > Timeout
> > (control reg=0x118) Error, address: 0x2134004 at 0x30BE974 (PC)
> >
> > System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> > Copyright (c) 1986-1995 by cisco Systems
> > 2500 processor with 14336 Kbytes of main memory
> >
> > F3: 15190636+262200+1062240 at 0x3000060
> >
> > Regards,
> > Joe
> > **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:17 GMT-3