From: ohanusi anthony (ohanusi@xxxxxxxxxxxxxxxxx)
Date: Fri Sep 14 2001 - 18:04:29 GMT-3
Is your ospf on frame relay working fine b/4 redistributing (can you ping
this respective ip address) on the ospf network .area range command is for
abr router for asbr use
ip summary command.
Regards
rAt 10:34 AM 9/14/2001 +0000, Cisco Lover wrote:
>Hi guys.
>istribut
>I am having a multipoint interface on my Hurb router say S0.1, running
>OSPF with /28 bit mask. I also have IGRP running on S0.2 PtP with 24 bit
>mask on the same interface(diff subinterface)+router.
>
>Now problem is that I am not able to redistribute that particular OSPF
>multipoint interface into IGRP by using redistribute ospf command into igrp??
>
>although I can see that the other OSPF routes behing Hub router are
>successfully redistributing into igrp.
>
>2nd prob..
>
>Although I can see those ospf routes(from routers behind HUb router) but
>not able to ping them.
>
>I have already put area 0 range ----- command on Hub router to summarise
>OSPF /28 mask to /24 but cant see any summary route in ip route list as
>well as this network on igrp routers.
>
>
>Many thanks for ur help
>
>Cisco lover
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:17 GMT-3