From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Wed Sep 05 2001 - 22:09:35 GMT-3
All,
I have the following
RouterA-------------------------routerB------------------------------routerC
Connected via ATM (using p2p ints)
I have the following configs:
RouterA
Router eigrp 1
Network 192.168.156.0
Network 172.24.0.0
No auto-summary
RouterB
Router eigrp 1
Network 192.168.156.0
Network 172.22.0.0
Int atm1/0.100
No ip split-horizon eigrp
Int atm1/0.101
No ip split-horizon eigrp
RouterC
Router eigrp 1
Network 172.26.0.0
Network 192.168.156.0
I can see the routes in the topology table on routerB, however I am seeing
the "FD is inaccessible" and the 172.26.0.0 from C is visible to B BUT NOT A
Any ideas?
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright owner
.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:14 GMT-3