From: Todd Veillette (tveillette@xxxxxxxx)
Date: Thu Aug 23 2001 - 01:13:43 GMT-3
Ahh I see. You dont need crossover's, but I'd change the security level of
ethernet 4. I don't believe 2 interfaces should have same security setting.
-Todd
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Michael Davis
Sent: Wednesday, August 22, 2001 10:54 PM
To: John Kaberna; Asim Khan; Scott M. Trieste; bravo;
ccielab@groupstudy.com
Subject: Re: PIX 515 configuration problem !! Help ME!
Yep. The pix will send heartbeats on all interfaces, so any non-connected
interfaces will be treated as down and trigger a failover. Back and forth.
Of that much, I am certain. What I can't remember is whether or not ip
address need to be configured on those interfaces. I believe they do.
Mike
#7303
----- Original Message -----
From: "John Kaberna" <jkaberna@netcginc.com>
To: "Asim Khan" <asimmegawatt@yahoo.com>; "Scott M. Trieste"
<strieste@hotmail.com>; "bravo" <bravojun@hanmail.net>;
<ccielab@groupstudy.com>
Sent: Wednesday, August 22, 2001 10:29 PM
Subject: Re: PIX 515 configuration problem !! Help ME!
> I think I remember reading that there's some problems in failover
> configurations if the unused interfaces are not cabled together. Even if
> they are not in use apparently they need a crossover cable connected to
each
> other. Does anyone else remember this? I am trying to remember the
problem
> that it causes, but that may be your problem. I could be way off and
people
> can flame me accordingly since I didn't verify what I'm saying.
>
> John Kaberna
> CCIE #7146
> NETCG Inc
> Cisco Premier Partner
> www.netcginc.com
> (415) 750-3800
> Fax: 750-3900
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:56 GMT-3