From: Jerry Toomey (jetoomey@xxxxxxxxx)
Date: Thu Aug 16 2001 - 14:06:34 GMT-3
On the Ctrl-Shift-6 command: if you type Ctrl-Shift-6, then "?", it will
give you the help screen:
ADSL-Router#
[Special telnet escape help]
^^B sends telnet BREAK
^^C sends telnet IP
^^H sends telnet EC
^^O sends telnet AO
^^T sends telnet AYT
^^U sends telnet EL
ADSL-Router#
I've always used Ctrl-Shift-6, then "c".
Jerry
--- Denise Donohue <fradendon@home.com> wrote:
> The command to stop the trace is just ctrl-shift-6. Adding the x tells
> the
> router to suspend (not close) the telnet session and returns you to the
> originating router/switch.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jason Sinclair
> Sent: Wednesday, August 15, 2001 11:20 PM
> To: 'Annu'; ccielab@groupstudy.com
> Subject: RE: Traceroute & Termserver
>
>
> Annu,
>
> In the term config set thet term emulation to vt-220.
>
> Regards,
>
> Jason Sinclair
> Team Leader - NSG
> POWERTEL Limited
> Level 11, 55 Clarence Street, SYDNEY
> Phone: 61-2-8264-3820
> Mobile: 0416 105 858
> jasons@powertel.net.au
>
>
>
> -----Original Message-----
> From: Annu [mailto:annu_roopa@yahoo.com]
> Sent: Thursday, 16 August 2001 12:45
> To: ccielab@groupstudy.com
> Subject: Traceroute & Termserver
>
> Group,
>
> May be this has been discussed,but could not find it
> in archives.
>
> Q1. I have got a Termserver to router connection and
> when trying to terminate a traceroute in router( with
> Ctrl+shift 6 x) it comes back to TS rather than break
> the traceroute.What is the solution ? as the
> traceroute continues....
>
> Example:
> r9#traceroute 10.1.1.1
> Type escape sequence to abort.
> Tracing the route to 10.1.1.1
>
> 1 * * *
> 2 * * *
> 3 * * *
> 4 * * *
> 5 * * *
> 6 * * *
> 7
> termsrver#
> [Resuming connection 3 to r9 ... ]
> *
>
> Q2. I am using hyperterm with win2K and somehow my
> arrow keys dont work to repeat or execute previous
> cmds.Do i have to upgrade it or what am i missing.i
> had done this before but seem to forget ?
=====
Jerry Toomey of http://www.wansend.com can be reached at 949-439-4685
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:51 GMT-3