From: Cox, Bryan (bryan.cox@xxxxxxxxxxxxxx)
Date: Sun Aug 12 2001 - 01:16:44 GMT-3
Group,
I have come to the conclusion that ISIS won't run in a frame-relay
environment with physical or multipoint interfaces without a full-mesh.
Even with "frame map clns <dlci> broadcast" on the spokes and hub I never
see the ISIS hellos being received at a spoke from another spoke. Thus no
adjacency is formed between the spokes.
In a full mesh I see the appropriate hellos between all points in the
frame-relay network. IS-IS forms adjacencies and all routes are installed
in the table.
Does anybody have any working configs for a hub and spoke environment with
point-to-multipoint or physical interfaces that they can post that say
otherswise? Or am I on the right track?
Thanks,
Bryan
San Jose October 25th
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3