From: jonatale@xxxxxxxxxxxxx
Date: Sun Aug 12 2001 - 08:10:39 GMT-3
i think you also need to make sure the hub is the DR
Cox, Bryan wrote:
> Group,
>
> I have come to the conclusion that ISIS won't run in a frame-relay
> environment with physical or multipoint interfaces without a full-mesh.
> Even with "frame map clns <dlci> broadcast" on the spokes and hub I never
> see the ISIS hellos being received at a spoke from another spoke. Thus no
> adjacency is formed between the spokes.
>
> In a full mesh I see the appropriate hellos between all points in the
> frame-relay network. IS-IS forms adjacencies and all routes are installed
> in the table.
>
> Does anybody have any working configs for a hub and spoke environment with
> point-to-multipoint or physical interfaces that they can post that say
> otherswise? Or am I on the right track?
>
> Thanks,
>
> Bryan
> San Jose October 25th
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3