From: Sandro Ciffali (sandyccie@xxxxxxxxx)
Date: Sat Aug 11 2001 - 11:03:23 GMT-3
Brian,
This is a common mistake, Ospf summary address command is to be used only
when you want to summarize the non ospf routes on the asbr to redistribute
in the ospf domain. If you need to distribute ospf routes in the igrp the
only way is to summarize the ospf routes using area range command, and then
they will get redistributed in the igrp, If you send me your config i can
give you tips on how can you achieve this.
Thanks
Sandro
----- Original Message -----
From: "Brian Lodwick" <xpranax@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, August 11, 2001 9:34 AM
Subject: OSPF summary-addresses
> I am having difficulty trying to get this schenario to work and wanted to
> see if someone out there could help me out? I have a network with OSPF,
> IGRP, and BGP. On the router running IGRP it is using a /28 bit mask. I am
> redistributing OSPF and IGRP both ways. I am trying to use OSPF
> summary-address feature to make all of the routes going to the IGRP
speaking
> router have /28 prefixes. The problem I am experiencing is when I do this
> the router that is redistributing will add these summary-routes to the
> routing table pointing to null0, so instead I've created a big black hole.
> Any suggestions? It worked fine when I sent the IGRP router a default
route
> instead, but I wanted to try this way, it should work this way, shouldn't
> it?
>
> >>>Brian
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3