From: ElleJf\(Yahoo\) (ellejf@xxxxxxxxx)
Date: Sat Aug 11 2001 - 11:08:23 GMT-3
Is lf required to set lf when connect token to ether via DLSw?
For example, token MTU 4096-->R1--DLSw (TCP MTU 17800)--R2-->ether MTU 1500. I
t mean R2 should segment frame to 1500 then send to ethernet. Will R2 do it wi
thout problem? Or we "need" to set lf on TCP connection to 1500?
In RFC1795, "This should be used to ensure that the two end-stations always neg
otiate a frame size to be used on a circuit that does not require the Origin an
d Target DLSw partners to re-segment frames."
|:"f
|g-J+~7&!"\"fv7,1+a6Zy
_rj(}J&
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3