From: jonatale@xxxxxxxxxxxxx
Date: Fri Aug 10 2001 - 04:10:24 GMT-3
I have an idea:
"loopback doesn't support bridging"
which word is confusing you?
sanjay wrote:
> How to configure Transparent bridging between a ethernet interface and
> loopback interface on the same router. I know the commands are something like
> this:
>
> bridge 1 protocol ieee (at the global config level)
>
> and then assign the bridge group to the interface. I can put the "bridge-grou
p
> 1" command under ethernet, but loopback interface doesn't accept the
> bridge-group 1 command. The message is "loopback doesn't support bridging"
> Any ideas ?
>
> thanks,
> Sanjay
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:48 GMT-3