From: Richard Gallagher (rgallagh@xxxxxxxxx)
Date: Thu Aug 09 2001 - 15:00:29 GMT-3
Nicolas,
Try breaking the router to rommon mode, then use the following command:
o/r 0x2142
This will boot the router without the config.
HTH,
Rich
CCIE#7211
On Aug 9, 5:57pm, nicholas chatted about:
> Subject:help for the router bootup problem!!!!
> hello, group
>
> I get the error coming from router 2513 suddenly, and i am wondering what is
> the
> next step to do?
>
> The router was working fine, and i was playing around for ospf, bgp, ipsec,
> dlsw all in this router
> as a part of my home lab. Today morning Suddenly i get this messages, and i
am
> not able to even
> boot up.
>
> If anyone had experienced the same problem and solved, please let me know...
>
> bye
>
>
>
>
> ------------------message from the router 2513----------
>
> cisco 2500 (68030) processor (revision M) with 2048K/2048K bytes of memory.
> Processor board ID 07076655, with hardware revision 00000000
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 Token Ring/IEEE 802.5 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
>
> SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
>
>
> SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
>
>
> SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
> **Please read:http://www.groupstudy.com/list/posting.html
>-- End of waffle from nicholas
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:47 GMT-3