From: nicholas (nicholas@xxxxxxxxxxxxx)
Date: Thu Aug 09 2001 - 14:10:58 GMT-3
hello, group
Thanks for your helps.
thanks again...
----- Original Message -----
From: "Richard Gallagher" <rgallagh@cisco.com>
To: "nicholas" <nicholas@newmerica.com>; <ccielab@groupstudy.com>
Sent: Thursday, August 09, 2001 11:00 AM
Subject: Re: help for the router bootup problem!!!!
> Nicolas,
>
> Try breaking the router to rommon mode, then use the following command:
>
> o/r 0x2142
>
> This will boot the router without the config.
>
> HTH,
>
> Rich
> CCIE#7211
>
> On Aug 9, 5:57pm, nicholas chatted about:
> > Subject:help for the router bootup problem!!!!
> > hello, group
> >
> > I get the error coming from router 2513 suddenly, and i am wondering
what is
> > the
> > next step to do?
> >
> > The router was working fine, and i was playing around for ospf, bgp,
ipsec,
> > dlsw all in this router
> > as a part of my home lab. Today morning Suddenly i get this messages,
and i
> am
> > not able to even
> > boot up.
> >
> > If anyone had experienced the same problem and solved, please let me
know...
> >
> > bye
> >
> >
> >
> >
> > ------------------message from the router 2513----------
> >
> > cisco 2500 (68030) processor (revision M) with 2048K/2048K bytes of
memory.
> > Processor board ID 07076655, with hardware revision 00000000
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > SuperLAT software (copyright 1990 by Meridian Technology Corp).
> > TN3270 Emulation software.
> > 1 Ethernet/IEEE 802.3 interface(s)
> > 1 Token Ring/IEEE 802.5 interface(s)
> > 2 Serial network interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read ONLY)
> >
> > SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
> >
> >
> > SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
> >
> >
> > SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
> > **Please read:http://www.groupstudy.com/list/posting.html
> >-- End of waffle from nicholas
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:47 GMT-3