From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Thu Aug 09 2001 - 13:01:26 GMT-3
and what error message are you getting?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
nicholas
Sent: Thursday, August 09, 2001 8:42 AM
To: ccielab@groupstudy.com
Subject:
hello, group
I get the error coming from router 2513 suddenly, and i am wondering what is
the
next step to do?
The router was working fine, and i was playing around for ospf, bgp, ipsec,
dlsw all in this router
as a part of my home lab. Today morning Suddenly i get this messages, and i
am
not able to even
boot up.
If anyone had experienced the same problem and solved, please let me know...
bye
------------------message from the router 2513----------
cisco 2500 (68030) processor (revision M) with 2048K/2048K bytes of memory.
Processor board ID 07076655, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:47 GMT-3