From: curtis staller (curtisstaller@xxxxxxxxxxx)
Date: Thu Aug 09 2001 - 18:48:09 GMT-3
This message is typically due to running an image without enough memory
(DRAM/SRAM; DRAM in this case) to support it. Your current memory at
boot reads "2048K/2048K ". This means the router sees 4 mg. Is this the
correct memory for the router? Try reseating the memory. Also, many
cisco routers will take regular "radio shack memory" if you need to
replace it....
>From: "Chuck Larrieu" >Reply-To: "Chuck Larrieu" >To: "nicholas" ,
>Subject: RE: use subject headers >Date: Thu, 9 Aug 2001 09:01:26 -0700 >
>and what error message are you getting? > >-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>nicholas >Sent: Thursday, August 09, 2001 8:42 AM >To:
ccielab@groupstudy.com >Subject: > > >hello, group > >I get the error
coming from router 2513 suddenly, and i am wondering what is >the >next
step to do? > >The router was working fine, and i was playing around for
ospf, bgp, ipsec, >dlsw all in this router >as a part of my home lab.
Today morning Suddenly i get this messages, and i >am >not able to even
>boot up. > >If anyone had experienced the same problem and solved,
please let me know... > >bye > > > > >------------------message from the
router 2513---------- > >cisco 2500 (68030) processor (revision M) with
2048K/2048K bytes of memory. >Processor board ID 07076655, with hardware
revision 00000000 >Bridging software. >X.25 software, Version 3.0.0.
>SuperLAT software (copyright 1990 by Meridian Technology Corp). >TN3270
Emulation software. >1 Ethernet/IEEE 802.3 interface(s) >1 Token
Ring/IEEE 802.5 interface(s) >2 Serial network interface(s) >32K bytes of
non-volatile configuration memory. >16384K bytes of processor board
System flash (Read ONLY) > >SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE
IMAGE! > > >SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! > >
>SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! >**Please
read:http://www.groupstudy.com/list/posting.html >**Please
read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:48 GMT-3