From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Sun Aug 05 2001 - 02:25:42 GMT-3
Michael: I would not configure ilmi (pvc 0/16) unless I were doing PVC
discovery. For PVC's, qsaal (pvc 0/5) is not needed nor desired. A
quick config is:
int atm 3/0
ip add 192.168.1.1 255.255.255.0
pvc 0/100
encap aal5snap (included here but also default)
protocol ip 192.168.1.10 broadcast (this is the map)
The PVC given to you is 0/100, and the target side has address .10.
HTH, Fred.
Michael Locke wrote:
>
> Hi all,
>
> Sorry if this is basic, but I don't have access to ATM
> equipment and would like some thoughts on this issue.
>
> With LANE out of the lab, it seems as the only two
> options left on the exam for ATM config are PVCs and
> classical IP. I can config. classical IP with no
> problem. My questions are with PVCs.
>
> If you are doing PVCs should you configure 0 16 and 0
> 5 pvcs in addition to the PVC for passing data or
> leave them out. I know these are mainly/basically for
> SVCs.
>
> If you do not want to rely on atm inverse arp then you
> need a map - same as with frame rely. Can someone
> show me an example of a basic atm map. The reason I
> ask this is I can't find one in print, don't have
> practice equipment. Another side to this same
> question is if you are configuring only 1 PVC, then do
> you have to use a map class for is there an
> easier/more basic way to do this.
>
> thanks,
> michael
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:45 GMT-3