From: Roberto Omori (roberto.omori@xxxxxxxxxx)
Date: Wed Aug 01 2001 - 16:18:52 GMT-3
This is the basic configuration. Only R2 should dial and there is no
authentication :
R1
Int bri 0
encap ppp
ip address 10.0.0.1 255.0.0.0
dialer-group 1
dialer map ip 10.0.0.2 name r2 broadcast <5552002> --------->omited
no cdp enable
dialer-list 1 protocol ip permit
R2
Int bri 0
encap ppp
ip address 10.0.0.2 255.0.0.0
dialer-group 1
dialer map ip 10.0.0.1 name r1 broadcast 5552001
no cdp enable
dialer-list 1 protocol ip permit
----- Original Message -----
From: <adiment@uswest.com>
To: <roberto.omori@bol.com.br>; <ccielab@groupstudy.com>
Sent: Wednesday, August 01, 2001 3:45 PM
Subject: RE: ISDN encapsulation Failed
> Acesso pelo menor prego do mercado! R$ 14,90 nos 3 primeiros meses!
> ASSINE AGORA! http://www.bol.com.br/acessobol/
>
>
>
> I would guess you are not using authentication. This same problem has
> happened to me. I found out in the CCIE power session at networkers that
> the routers still need to resolve where to send the packets in the
> dialer-map statement. Either using a dial string or authentication. If
one
> side does not have a dial string you need authentication to resolve it.
>
> -----Original Message-----
> From: Roberto Omori [mailto:roberto.omori@bol.com.br]
> Sent: Wednesday, August 01, 2001 1:24 PM
> To: ccielab@groupstudy.com
> Subject: ISDN encapsulation Failed
>
>
> Hi all,
>
> To allow only one side to make the call the basic idea is omit the dial
> string
> isnt it? Well, I have experienced the following problem:
>
> 1-If I config. the strings on both sides I can ping both routers.
>
> 2-If I config. only one side, it dials, the connection is established but
I
> cannot ping the remote router.
>
> Debugging ip packets, it presents an "encapsulation failed" message.
>
> Has anyone experienced this problem?
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:43 GMT-3