From: Mas Kato (tealp729@xxxxxxxx)
Date: Mon Jun 18 2001 - 04:36:09 GMT-3
How about sourcing the SAPs from an IPX internal network?
Mas
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bob Chahal
Sent: Sunday, June 17, 2001 11:57 PM
To: ccielab@groupstudy.com
Subject: IPX static saps
Hi,
I have a question....
A router (R1) that has its physical interfaces (s0, s1 and e0)
configured
for IPX RIP only. You are asked to configure two static saps. All other
routers in the network should be able to see these saps. How could you
get
this to work because the split horizon rule would prevent R1 from
sending
the sap broadcasts out of the interface you associate the static saps
to.
i.e
int e0
ipx network 1001
!
ipx sap 4 file 1001.0000.0000.0001 451 1
This sap would not get advertised out of e0 and any attached routers
configured for IPX on the segment would not find out about this sap.
I've
tried a few things like using a different network and using static
routes
etc. I would usually configure an IPX network to a loopback and
associate
the sap to the loopback but in this case you are not allowed to
configure a
loopback.
TIA
Bob
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:26 GMT-3