From: Bob Chahal (bob.chahal@xxxxxxxxxxxx)
Date: Mon Jun 18 2001 - 03:57:28 GMT-3
Hi,
I have a question....
A router (R1) that has its physical interfaces (s0, s1 and e0) configured
for IPX RIP only. You are asked to configure two static saps. All other
routers in the network should be able to see these saps. How could you get
this to work because the split horizon rule would prevent R1 from sending
the sap broadcasts out of the interface you associate the static saps to.
i.e
int e0
ipx network 1001
!
ipx sap 4 file 1001.0000.0000.0001 451 1
This sap would not get advertised out of e0 and any attached routers
configured for IPX on the segment would not find out about this sap. I've
tried a few things like using a different network and using static routes
etc. I would usually configure an IPX network to a loopback and associate
the sap to the loopback but in this case you are not allowed to configure a
loopback.
TIA
Bob
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:26 GMT-3