From: Richard Gallagher (rgallagh@xxxxxxxxx)
Date: Thu Jun 14 2001 - 14:03:12 GMT-3
Jaun,
Check this link out (watch the word wrap)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/inter_r
/irdacces.htm#xtocid2700921http://www.cisco.com/univercd/cc/td/doc/product/soft
ware/ios121/121cgcr/inter_r/irdacces.htm#xtocid2700921
Rich
CCIE#7211
On Jun 14, 4:56pm, JUAN FAURE FERRER chatted about:
> Subject:Carrier-delay command
> Hello!
>
> I've having problems providing service to my client by means of a Frame
Relay, because there is very frecuent lost of carrier. Then the serial line
goes down for a few seconds only, but sometimes the PVCs go down too.
>
> The frame relay provider says that I must put in the serial interface the
command "carrier-delay 20" to solve theses problems.
>
> Do yo know that command and what does it exactly?
>
> Thank you very much and best regards
>
> Juan Faure Ferrer
> e-mail: jfaure@ipt.es
>
> Area de Telematica
> Integracisn de Redes y Sistemas
> IPT SOLUZIONA TELECOMUNICACIONES
> c/Jerez, 3 28016 MADRID
> Tfno: 91 579 30 00 Fax: 91 350 72 83
> **Please read:http://www.groupstudy.com/list/posting.html
>-- End of waffle from JUAN FAURE FERRER
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:23 GMT-3