From: Richard Geiger (geiger_rich@xxxxxxxxxxx)
Date: Sun Jun 10 2001 - 16:28:21 GMT-3
Got it!
The flash is dead. Thats why there are no copy commands, I have nothing to
copy too, I have to crack the box and find out if it just came loose in
travel.
Also the TFTP copy problem I had is that I can't specify
Boot network <file>
I had to
boot system tftp <file>
>From: Jon Carmichael <jonc@pacbell.net>
>To: Richard Geiger <geiger_rich@hotmail.com>, ccielab@groupstudy.com
>Subject: RE: Recovery from corrupt image ... HELP!!!
>Date: Sun, 10 Jun 2001 11:38:17 -0700
>
>When you come up with your config register set to 2101, you come to a ROM
>based IOS, --that is very crippled, not capable of doing IP routing.
>However with that you can recover with "copy tftp flash." --And if you
>don't have a TFTP server, --you make one out of another router. At a
>router that has a good image, you put in "tftp-server flash
><his-file-in-flash>" and if you give each device a valid IP
>address, --across say a back to back Ethernet or thru a hub and you can
>recover this way.
>
>JONC
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Richard Geiger
>Sent: Sunday, June 10, 2001 10:52 AM
>To: ccielab@groupstudy.com
>Subject: Recovery from corrupt image ... HELP!!!
>
>
>I have a 2504 router with the flash erased.
>
>It is bootstrapping from ROM.
>
>ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE
>SOFTWARE
>(fc1)
>
>I have tried doing a config reg 0x2102 or 0x2101
>
>THERE IS NO COPY FLASH/TFTP/XMODEM etc......
>
>When I do a boot from my TFTP server it bombs.
>
>
>HELP
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3