From: Richard Geiger (geiger_rich@xxxxxxxxxxx)
Date: Sun Jun 10 2001 - 16:28:01 GMT-3
Got it!
The flash is dead. Thats why there are no copy commands, I have nothing to
copy too, I have to crack the box and find out if it just came loose in
travel.
Also the TFTP copy problem I had is that I can't specify
Boot network <file>
I had to
boot system tftp <file>
>From: Rick Burts <burts@mentortech.com>
>To: Richard Geiger <geiger_rich@hotmail.com>
>CC: ccielab@groupstudy.com
>Subject: Re: Recovery from corrupt image ... HELP!!!
>Date: Sun, 10 Jun 2001 15:00:07 -0400 (EDT)
>
>Richard
>
>If you are booting into ROM there should be a copy command that will
>allow you to copy an image from a tftp server to the router.
>
>You say when you boot from tftp server it bombs. It would be helpful
>to have some details about how you set it up to booot from the server
>and to have some details about the error messages (does it find the
>server, does it find the image file on the server, does the transfer
>start and get interrupted, does it transfer and then fail to run).
>Knowing these things might help us give a more helpful answer.
>
>Rick
>
>Rick Burts, CCSI CCIE 4615 burts@mentortech.com
>Mentor Technologies 240-568-6500 ext 6652
>133 National Business Parkway 240-568-6515 fax
>Annapolis Junction, Md 20701
>
>Chesapeake Network Solutions has now become Mentor Technologies.
>Mentor Technologies is a certified Cisco Training Partner and also
>a Cisco Professional Services partner.
>We offer most of the Cisco training courses.
>We also offer training in Checkpoint Firewall software and
>Fore Systems (now Marconi) and MicroMuse.
>We also provide network consulting services including
>design, management, and problem solving.
>We have 21 CCIEs on our staff.
>We offer the breakthrough VLAB remote access technology for
>access to practice configuration on real equipment.
>
>On Sun, 10 Jun 2001, Richard Geiger wrote:
>
> > I have a 2504 router with the flash erased.
> >
> > It is bootstrapping from ROM.
> >
> > ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE
> > SOFTWARE
> > (fc1)
> >
> > I have tried doing a config reg 0x2102 or 0x2101
> >
> > THERE IS NO COPY FLASH/TFTP/XMODEM etc......
> >
> > When I do a boot from my TFTP server it bombs.
> >
> >
> > HELP
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3